ADA Compliant Signs in Houston, TX
Room IDs, restroom, wayfinding and egress signs with Grade 2 braille — fabricated to the ADA Standards and the Texas Accessibility Standards, installed at the right height on the right wall.
The one sign type where "close enough" fails inspection
ADA signage is bought differently from every other sign on this site: nobody wants it until a certificate of occupancy, a TDLR inspection or a tenant build-out schedule demands it. That’s why most of our ADA work comes from property managers, general contractors and facility teams who need a full building’s worth of compliant room signs on a deadline — not one sign at a time. We survey the space, produce the sign schedule, fabricate the braille and tactile faces in our own 77084 shop, and install every sign at code height.
ADA signs are one part of our indoor & office sign catalogue — if you’re building out a whole interior, the same crew handles the lobby sign and the compliance package in one pass. Need numbers for a bid? Send us the door schedule and we’ll quote it line by line.
The rules your signs are inspected against
The essentials from the 2010 ADA Standards (§703) and the Texas Accessibility Standards — the checklist we fabricate to. (Current as of 2026; codes get amended, we track them so you don't have to.)
Grade 2 braille
Contracted (Grade 2) braille with domed dots, placed directly below the corresponding text. Flat-printed dots don't pass — braille must be readable by touch.
Tactile characters
Raised, uppercase, sans-serif characters — no scripts or italics — sized roughly 5/8" to 2" tall. Room-identifying signs must be readable by touch, not just sight.
Contrast & finish
Non-glare background and characters that contrast strongly with it — light-on-dark or dark-on-light. Brushed metal and gloss acrylic have to be handled carefully here.
Mounting height & location
Tactile characters land between 48" and 60" above the finished floor, on the latch side of the door, with clear floor space to approach. Install placement is half of compliance.
Pictograms
Restroom and accessibility pictograms sit in their own 6"-high field with the text description and braille below it — a detail that trips up a lot of off-the-shelf signs.
Which signs need it
Signs identifying permanent rooms and spaces — room numbers, restrooms, stairwells, exits. Directional and informational signs follow legibility rules but don't need braille.
ADA sign packages, not one-off signs
Most ADA work is a schedule of dozens or hundreds of signs. These are the three packages we quote every week.
Room ID & Door Sign Packages
Room numbers, restrooms, offices, storage and utility rooms — every permanent space in the building, produced as one consistent sign family from a room-by-room survey. We’ve photo-documented this work for corporate clients like Bank of America and ABM: tactile room IDs on doors, glass sidelights and walls, with changeable-insert nameplates where the code allows them. You get a sign schedule your GC or property manager can sign off on before anything is fabricated.
- Room numbers, restroom & utility IDs with Grade 2 braille
- Sign schedules for GCs, architects & property managers
- Changeable-insert nameplates for rooms that get reassigned
Wayfinding & Directory Packages
Directories, directional signs, floor and stairwell identification — the layer that routes visitors and keeps inspectors happy at the same time. Campus-scale wayfinding is a specialty: at Eagles Trace, a senior-living campus in west Houston, we produced and installed braille stairwell, floor and life-safety signage building by building. Directional signs don’t need braille, but they do need compliant character sizing and contrast — we design the whole family so both layers match.
- Stairwell, floor & elevator identification with braille
- Directories & directional signage in one visual family
- Senior living, medical, school & office campuses
Exit, Egress & Safety Signage
Exit and exit-route signs are permanent-space signage under the standards — which means tactile text and braille, not just the lit box above the door. We fabricate braille EXIT signs, area-of-refuge and emergency instruction signage, and the accessibility markings inspectors check on walkthroughs, and we can re-sign a whole building in one pass when an inspection or insurance review turns up gaps.
- Tactile EXIT & exit-route signs with braille
- Emergency instruction & area-of-refuge signage
- Whole-building compliance sweeps after inspections
Where ADA signs fit in Texas red tape
Interior ADA signs generally don’t need a City of Houston sign permit — that’s an exterior sign issue (our Houston sign permit guide covers when permits apply). The enforcement path for ADA signage runs through the Texas Accessibility Standards instead: larger Texas construction projects get TDLR plan review and inspection, and non-compliant signage is one of the easy findings. If your project has a registered accessibility inspection coming, hand us the door schedule early — it’s far cheaper to fabricate signs right than to replace them after a citation.
ADA & wayfinding work around Houston
Bank of America
Houston TX
Houston TX
Bank of America
One shop, survey to inspection
ADA packages fail in the handoffs — a sign shop that prints, a subcontractor that mounts at the wrong height, nobody owning the schedule. We own all of it. Rebranding the whole interior at the same time? See indoor & office signs or corporate rebranding.
Questions we get
Which signs in my building actually need braille?
Signs that identify permanent rooms and spaces: room numbers, restrooms, stairwells, exits, storage and utility rooms. Directional and informational signs (arrows, directories, hour signs) must meet legibility rules but don't need braille or tactile text. A room-by-room survey settles the list — that's the first thing we do.
What height do ADA signs mount at?
Tactile characters must sit between 48" and 60" above the finished floor, on the latch side of the door, with clear floor space to approach. Placement is checked at inspection just like the sign itself, which is why we install rather than ship.
Is Texas different from the federal ADA?
Texas enforces its own Texas Accessibility Standards (TAS) through TDLR, which track the 2010 ADA Standards closely — larger construction projects in Texas get TDLR plan review and inspection. We fabricate to satisfy both, so the same sign passes the federal standard and the state inspection.
Do ADA signs need a City of Houston sign permit?
Interior ADA signs generally don't — city sign permits are mostly an exterior issue. See our Houston sign permit guide for when permits do apply, or our permitting service if your project mixes interior and exterior signage.
Can ADA signs still match our brand?
Yes — the standards constrain contrast, finish, typefaces and mounting, not your colors or materials. We've built compliant sign families for corporate offices and campuses that read as brand signage first and code signage second; see the indoor & office catalogue for the rest of the family.
Get a quote
Tell us what you need — a sign specialist replies the same business day.