Wall Graphics & Murals in Houston, TX
Printed wall murals and cut vinyl graphics — designed, printed and installed by one Houston shop, from a single logo wall to a full brand environment.
Two ways to put your brand on a wall
Full-coverage printed murals or plotter-cut vinyl graphics — the artwork and the wall decide which one your project needs. Both are produced and installed by us, start to finish.
Full-wall print
Floor-to-ceiling printed vinyl: brand artwork, photography and patterns at architectural scale.
See the details →
Logos & lettering
Plotter-cut vinyl in exact brand colors: logos, mission statements and accent lettering.
See the details →
Our 77084 shop
Artwork, proofing, printing, laminating and cutting all happen under one roof.
See the details →Printed murals, cut vinyl & how we produce both
Different construction, different budget, different look — here’s how each one actually gets made.
Printed Wall Murals & Wallcoverings
A printed mural covers the wall edge to edge: brand artwork, photography, timelines or abstract patterns printed on adhesive wall vinyl in panels, then laminated and installed seam-matched. The SAIC Houston Innovation Factory lobby shown here is our work — a full-wall printed graphic running behind brushed-metal dimensional letters, planned so the panels land cleanly around corners, outlets and switch plates. The laminate does double duty: it takes the scuffs a hallway or breakroom hands out, and a matte finish kills glare under office lighting.
- Floor-to-ceiling coverage, panelled around corners & outlets
- Laminated for scuff resistance; matte option controls glare
- Pairs with dimensional letters for full lobby builds
Cut Vinyl Graphics & Lettering
When the artwork is flat color — a logo, a mission statement, hours, department names — cut vinyl is usually the better build than a full print. Each color is plotter-cut from a solid vinyl in that exact color, weeded by hand and applied with transfer tape, so your brand blue is that vinyl’s blue, not a printed approximation of it. The Lowe’s Pro Supply wall shown here is a two-color cut vinyl logo on a painted feature wall: only the graphic is vinyl, the wall does the rest, which is also what makes cut vinyl the budget-friendly option.
- Exact brand-color match from solid vinyl, not CMYK print
- Logos, core-values statements, hours & directional lettering
- Lower cost — only the graphic is vinyl, not the whole wall
Designed, Printed & Cut In Our Shop
Every wall graphic on this page runs through the wide-format print-and-cut equipment in our own 77084 shop — the same production line behind our vehicle and fleet graphics. Keeping it under one roof means you approve a proof on the actual material before install day, color gets checked against your brand standards in the shop rather than discovered on the wall, and if a panel gets damaged during a build-out, the reprint is a shop job, not a vendor negotiation. Rebranding several locations at once? Our corporate rebranding team phases wall graphics across sites on one schedule.
- Wide-format printing & plotter cutting under one roof
- Proofs on the actual material, not just a PDF
- Fast reprints & phased installs for multi-wall projects
The wall decides: texture, paint & adhesion
The vinyl is the easy part — the wall is the variable. Smooth drywall takes graphics beautifully. The orange-peel and knockdown textures that most Houston offices and retail spaces are finished with need a more conformable vinyl worked into the texture, and sometimes the honest answer from the survey is to skim-coat the wall first or pick a smoother one — we’d rather tell you that before you’ve paid for a print. Brick and concrete block are a different conversation again, which is why we look at the actual wall before we quote it.
Paint matters just as much: freshly painted walls need to finish curing before vinyl will bond, and some scrubbable and stain-resistant paint formulas resist adhesive as effectively as they resist stains — when in doubt, we put a test patch on the wall before committing the whole job. And if you’re in a leased space, say so: we’ll spec a removable adhesive so the graphics come off clean at move-out instead of costing you a repaint from your deposit.
From bare wall to brand wall
The same four steps on every wall graphic job — all of them under our roof.
Survey & test patch
We measure the wall, check texture and paint, and test-patch adhesion when in doubt — before you commit to anything.
Design & proof
Our in-house designers build the artwork to your wall's real dimensions, and you approve a scaled proof before print.
Print, laminate & cut
Printed and plotter-cut on our own wide-format equipment in 77084, laminated where the wall will take abuse.
Install day
Our own crews apply the graphics — after hours or over a weekend if your space can't pause — see sign installation.
Big-format branding, indoors and out
Wall graphics are part of our indoor & office signs catalogue, and they rarely travel alone: window graphics, floor graphics and lobby signs are usually installed on the same visit, by the same crew. Thinking bigger than the lobby? Graphics on an exterior wall generally count as signage under City of Houston sign code — we run the permitting and the rest of the outdoor sign catalogue in-house.
We’ve photo-documented sign and graphics work for 750+ Houston-area companies across Houston, Katy, Cypress, Sugar Land, Richmond and Spring. Not sure whether your wall wants a mural, cut vinyl or just a better lobby sign? Send us a photo of the wall and we’ll tell you straight what will work on it.
Wall graphics work around Houston
SAIC · Houston Innovation Factory
Lowe's Pro Supply
Our 77084 shop
Our 77084 shop
What clients say
“beyond expectations”
“They provided amazing customer service, honesty and prices … truly a trustworthy company.”
One shop, start to finish
A wall graphic passes through design, print, lamination, cutting and installation — split that across vendors and the color drifts, the panels misalign and the schedule slips. Here it's one building. Planning a bigger refresh? See corporate rebranding or the full indoor sign catalogue.
Questions we get
Will wall graphics damage the paint when they come off?
Not if they're specced for it. Tell us up front if you're in a leased space or the graphics are temporary — we'll use a removable adhesive that releases clean at move-out. Long-term graphics use a more permanent adhesive, and removing those years later can pull paint, which is a spec decision, not a surprise, when it's made at the survey.
Can you install wall graphics on textured walls?
Often, yes — orange-peel and knockdown textures need a more conformable vinyl worked into the surface, and the result reads slightly textured rather than poster-flat. When the texture is too heavy for a clean result, we'll say so at the survey and suggest skim-coating or a smoother wall instead of selling you a print that will fail.
Printed mural or cut vinyl — which one do I need?
Flat-color artwork (logos, lettering, simple shapes) is usually better as cut vinyl — exact brand colors, lower cost. Photography, gradients or edge-to-edge scenes need a printed mural. Plenty of walls combine both, like a printed backdrop with dimensional letters on top.
Do wall graphics need a permit in Houston?
Interior wall graphics don't need a City of Houston sign permit. Graphics on an exterior wall generally do count as signage under the sign code — as a licensed Texas sign contractor (TSCL #19124) we run the zoning check and permitting as part of the job.
Can you install without shutting down our office?
Yes — wall graphic installs are routinely scheduled after hours or over a weekend, and multi-wall projects are phased area by area so your team keeps working.
Get a quote
Tell us what you need — a sign specialist replies the same business day.